Orlando pool resurfacing
A quartz interior swaps the marble sand of plain plaster for crushed quartz and polymers. Manufacturers describe it as more resistant to etching and staining than white plaster while staying smooth underfoot, and because the aggregate carries the color, it opens up far more shades of blue, grey and green water.
A quartz finish is still a cement-based interior, but the soft marble sand of traditional plaster is replaced with crushed quartz, usually colored, plus polymers blended into the mix. Quartz is a much harder mineral than marble. Finish manufacturers describe the result as a surface with better resistance to etching, staining and chemical wear than white plaster, while staying close to plaster in feel. It is troweled smooth, so it does not have the bumpy texture of an exposed-pebble interior. For many owners it sits in the middle: more durable than plain plaster, smoother underfoot than stone.
Because the aggregate carries the color, quartz comes in far more shades than white plaster, from pale blues and greys to darker tones. The shade of the finish decides the color of the water: light interiors read as bright turquoise in full sun, dark interiors read as deep blue or lagoon green. A dry chip in a brochure looks different from the same finish under water, so it helps to judge a sample dropped into a bucket of your own pool water, in the light your yard actually gets. A pool in full sun, one shaded by oaks and one under a screen enclosure will each show the same shade differently.
Harder aggregate does not make the cement binder around it immune. The National Plasterers Council notes that aggressive water, meaning water that is out of balance, such as low pH or low alkalinity, attacks the cement paste around each grain, and that salt makes water more aggressive. A salt system, a pool that loses water to afternoon storms and is topped up often, or a habit of letting pH drift low will all shorten the life of any cement finish, quartz included. NPC suggests keeping the saturation index between 0.0 and +0.3.
Quartz goes on the same way a standard replaster does: the pool is drained safely, the old surface is prepared, and a start-up routine follows the fill. The difference is in the material and in how it wears. If the texture of stone does not bother you and you want the most chemical-resistant surface, compare it with a pebble aggregate interior. If the waterline tile is also stained or loose, it makes sense to replace the tile band while the pool is empty, rather than draining a second time later.
What sets the schedule? Pool size, the condition of the surface underneath, the color and blend chosen and when that material is available, the weather on application day, and the start-up period after the fill.
These usually come up in the same drain, and can be quoted from the same visit:
Worn, etched or stained plaster chipped back and replaced, with the drain-down managed for Central Florida’s groundwater.
What it involves →Exposed-aggregate interiors of small natural stones, the most chemical-resistant option, with a textured feel underfoot.
What it involves →Scaled, cracked or loose waterline tile taken off to the bond beam and reset in impervious glass or porcelain.
What it involves →Free estimate
Tell us where the pool is and what you’re seeing. We’ll call back to book a look at the pool and bring finish samples.
We’ll call to set up a time to see the pool. To talk sooner, call (689) 305-2500
Something went wrong sending your request. Please call (689) 305-2500 and we’ll take the details over the phone. Your answers are still filled in below if you’d rather try again.